HPTS

High Performance Timing System

Time & Frequency Solutions High Performance Timing System is the most accurate frequency system currently available, with inherent 10ns accuracy.  This next generation, dual redundant, network-centric, modular timing system includes a novel architecture that allows automatic compensation of propagation delay.  The HPTS also offers a range of rubidium options including caesium clocks to ensure the highest accuracy of your timing system.  Input synchronisation sources include GPS, SAASM GPS, Have Quick, 1PPS, IRIG A, IRIG B, IRIG G, 10MHz, and NTP.  Outputs include Have Quick, 1PPS, IRIG A, IRIG B, IRIG G, 10MHz, and NTP.  The HPTS is ruggedised and fully qualified for airborne, shipboard, and land mobile applications.

Time & Frequency Solutions has used the HPTS as the main master clock for many time and frequency systems for military applications. The HPTS coupled with the PTS-SAASM provides the critical timing accuracy needed for many applications.

The HPTS is able to function as a master clock to create custom systems requiring crucial timing accuracy.

Features

Key HPTS Features

  • Modular Timing System
  • Flexible
  • Upgradeable
  • Redundant
  • Hot Swappable Modules
  • High Accuracy
  • Network-Centric
  • Rugged
  • Environmentally Qualified
  • Automatic Propagation Delay Compensation
  • Flexible input reference – GPS, Have Quick, IRIG B

The HPTS receives a basic input reference from a GPS receiver, or external source and, in turn supplies a variety of time and frequency signals in a wide variety of available formats.  The unit is a ruggedised system specified to provide full performance over a wide range of environmental conditions.

A unique design feature of the HPTS enables it to distribute time reference signals over a wide area, while providing automatic compensation for propagation delays.  The HPTS has been designed from the outset as a “network centric” product. All features and functions can be monitored and controlled by means of an Ethernet interface.

Two Master Clock Modules (MCM), each utilising a rubidium or ovenised quartz oscillator, are used to provide redundant time base information for synchronisation and system operation. The subsystem components are connected to a backplane bus built into the systems chassis. Output signals are a variety of low voltage analog and digital type signals such as 10MHz, 1PPS, Have Quick and IRIG Time Code.

Specifications

System Accuracy
MCM Timing Accuracy when locked to Input Reference
External Have Quick / 1PPS <15ns
IRIG B (Modulated) <2µsec
GPS (calibrated antenna cable delay) <50ns
MCM Frequency Accuracy (24hr avg.)
Rubidium Oscillator Option <1x10-12 when locked to input reference
<5x10-11 after 24 hr. holdover
Ovenised Quartz Oscillator Option <1x10-12 when locked to input reference
<2x10-10 after 24 hr. holdover
Short Term Stability at 10 MHz Output
1 sec <1x10-11
10 sec <1x10-11
100 sec <1x10-10
Output Signal Module Accuracy with respect to MCM
1PPS Main Chassis: +/- 5ns
Remote Location (<2km): +/- 20ns
Have Quick Main Chassis: +/- 5ns
Remote Location (<2km): +/- 20ns
IRIG B124 Main Chassis: +/- 250ns
Remote Location (<2km): +/- 250ns
IRIG B DC Main Chassis: +/- 40ns
Remote Location (<2km): +/- 60ns
Physical
Dimensions 19"W x 7"H (5RU) x 12" D
Weight 24 lb. nominal
Environmental
Temperature
Operating -10 to +50°C
Emergency Operating 70°C 5 minutes without damage
Storage -40 to +85°C
Humidity 5% to 95% non condensing
Altitude Operating: -1500 to +11000 ft
Non-Operating: -1500 to +41000 ft

Resources & Downloads

Data Sheets