PC/104-SG
Bus-Level Timing Board
The PC/104-SG provides precision timing to a host computer through the PC/104 bus. The on-board microprocessor can automatically synchronise the clock to a range of signal inputs, e.g. 1PPS, IRIG and NASA time codes, GPS and HaveQuick.
Features
- Continual time error measurement between on-board clock and the reference input signals.
- Error measurement adjustment for propagation delay.
- Range of input and output options, including IRIG timecodes
- Optional disciplined TXCO or OXCO.
- 3 user-programmable pulse rates
- Optional GPS receiver
- Time-tagging of external events
- Match Time feature, from which Internal or External processes may be automatically initiated or terminated.
Optional Disciplined Oscillator
Enhance performance by selecting optional disciplined TXCO or OXCO. By locking the oscillator to the synchronising time source, the oscillator is automatically calibrated, ensuring that a precise timebase is always available. During periods where there is no synchronising time source, the performance of the module reverts to the oscillator specification. When the input signal is available the oscillator will return to normal disciplining.
58 bits of BCD time data are available to the host computer using two zero latency time reads. The time message contains units of microseconds through units. A status word is available using an additional read.
Pulse Rates
The PC/104-SG provides three user programmable pulse rates. Two pulse rates, Clock Low and Clock High, are available on the multi-pin connector. The third rate generator provides heartbeat timing to the host computer.
Optional GPS Receiver
The optional on-board GPS Receiver receives and decodes transmissions from GPS satellites, allowing the timing system to accurately synchronise to Universal Coordinated Time (UTC). Automatic leap year, leap second correction and accurate positional information are additional benefits provided by the GPS option.
N.B. Software packages are available as options. C language examples are supplied as standard.
Specifications
Input Specification
Timecodes: IRIG A & B, NASA 36
1 PPS Input: TTL positive edge, 1m Second accuracy
External Event: TTL positive 20nS minimum PW.
Resolution - 100ns- hundreds of days
Output Specification
IRIG-B DC Level Shift: TTL
Match Pulse: TTL level at Start-Stop time
Clock Low Pulse: TTL negative going
Clock High Pulse: TTL negative going
Heartbeat Rate: Interrupt, flag, TTL negative going
BCD Time: µs-days on demand, no latency,
58 bits in 8-bit words
Interrupts: External event, Heartbeat, Match Time
Flags: FIFO data ready, In sync, Heartbeat,
Match Time, External Event
Connectors: 5 and 10 pin right-angle connector
Host Interface: 32bit PC/104
Environmental (Operating & Storage)
Temperature: 0°C to +55°C
Humidity: Up to 95% RH (non condensing)
EMC: CE Compliant
|